Parts
Neon offers replacement parts service for most brands of lift trucks and skid steer loaders.
We have the technical knowledge and experience to see that you get the correct parts needed to keep your equipment running reliably and safely.
We will go out of our way to see that you get the parts you need when you need them!
We stock a wide range of items, including:
- routine maintenance items including oils and filters
- tires
- starters and alternators, both new and rebuilt
- hydraulic lines and hoses
- brake kits
- overhaul parts for major engine and transmission rebuilds
- electrical components for SCR and transistor controls
- steering axle bearings, tie rod ends, king pin kits and knuckles
- fuel system components for gasoline, LPG and diesel engines
- bucket cutting edges and tooth bars
- forks
- hydraulic demolition hammer bits
Master Card, VISA, American Express, & Discover are accepted.
Click on us again soon as we are frequently adding new items to this section.
Call us by telephone at 216-587-0400, or
E-mail us at info@neonmaterialhandling.com, or
Visit our Parts Department counter at 9601 Granger Rd., Cleveland, Ohio 44125 (Garfield Hts.)
|
Monday - Friday |
8:00am to 5:00pm |
|
Saturday & Sunday |
Closed |
From Cleveland:
Take East 98th Street (Transportation Blvd.) north (exit #21 off I-480) to Midwest Avenue. Then take a left onto Midwest, NEON Material Handling is the second building on the left.
From Ohio Turnpike exit 8A:
Take I-480 East to exit 21 - East 98th Street (Transportation Blvd.)
From Ohio Turnpike exit 11:
Take I-77 North to I-480 East to exit 21 - East 98th Street (Transportation Blvd.)
From Ohio Turnpike exit 12:
Take Route 8 North to I-271 North to I-480 West to Exit 21 - East 98th St. (Transportation Blvd.)
From Ohio Turnpike exit 13:
Take I-480 West to Route 271 & I-480 spur North to I-480 West to exit 21 - East 98th Street (Transportation Blvd.)
The serial number is stamped into the frame.
This photo shows the two most common locations for serial numbers for Clark trucks built through 1994.
Go to our Used Equipment tab and the section titled Clark Serial Number Location for more information on serial number locations for various models of trucks.
To identify the correct parts for your lift truck's upright including cylinder packings, chains, and roller bearings, we need the Upright Deck Number which is stamped into the front edge of the outer rail.
See photo composite for upright deck number location for most trucks built prior to 1995.
Call or e-mail us for additional assistance if needed.
We service all brands of forklift trucks, skid steer loaders, excavators, tractor loader backhoes, scissors lift aerial work platforms, boom supported aerial work platforms, personnel carriers, and burden carriers.